news

When installing and using powder metallurgy gears, please do not use them outside the specifications on the gearbox and motor nameplate or product catalog to avoid electric shock, injury, and damage to the device. At the same time, it is worth noting that please do not put your fingers or objects into the openings of the gear or motor and do not use the gear box or motor in question, so as to avoid possible injury or fire.

When the powder metallurgy high-strength alloy gear is moved, Powder Metallurgy Sintered Sprocket Metal Parts please be careful not to fall off or fall. The choice of the installation position of the powder metallurgy high-strength alloy gear, the powder metallurgy high-strength alloy gear can not prevent combustibles and prevent fires from the side of the powder metallurgy high-strength alloy gear. This is because the powder metallurgy high-strength alloy gear generates a lot of heat when it is in motion. If there are flammable materials nearby, it is easy to cause the flammable materials to burn and cause a fire. At the same time, if other items are placed next to the installation location, it will affect the ventilation and cooling of the powder metallurgy high-strength alloy gear.

When installing powder metallurgy high-strength alloy gears, it is necessary to implement the connection with the power supply according to the wiring diagram or instruction manual to avoid electric shock or fire.

Do not approach or lift rotating objects (shafts, gears, etc.) when powder metallurgy high-strength alloy gears are running. When sundries are involved or injured, immediately turn off the power switch and deal with it in time. In addition, it should be noted that when the power is cut off, the power switch must be turned off to prevent injury or damage to the device after the power is turned on. Some powder metallurgy high-strength alloy gear motors have thermal protectors. When the temperature of the motor is abnormal, the power supply will be automatically cut off. When the temperature of the motor drops to a certain value, the motor will automatically resume operation.